The MAC 2000 Profile is a high performance luminaire with two rotating gobo wheels, full CMY color mixing, effect wheel and a combined color and gobo wheel.
DESCRIPTION
The MAC 2000 Profile is a high performance luminaire with a gobo animation system, full CMY mixing and a framing system, effect wheel and a combined color and gobo wheel.
VIDEO
SPECIFICATIONS
Width: 490 mm
Height: 743 mm, head straight up
Weight: 38 kg, electronic ballast model
Weight: 45 kg
Dynamic Effects Color mixing: CMY, independently variable 0 – 100%
Color temperature control: 0 – 178 mireds, continuously variable
Color/gobo wheel: 4 interchangeable filters (incl. UV transmitter), 3 interchangeable glass gobos + open, full and split colors, continuous rotation
Rotating gobos: 2 wheels, each with 5 interchangeable gobos + open, indexing, continuous gobo rotation, shake
Beam effects: Effect wheel with variable frost, rotating beamshaper and rotating 3-facet prism
Mechanical dimmer: 0 – 100%
Shutter: Strobe effect 2 – 10 Hz, pulse effects, instant open and blackout
Iris: 15 – 100% diameter, pulse effects
Focus: 2 m to infinity
Zoom: 10° – 28°
Pan: 540°
Tilt: 267°Control and Programming
DMX channels: 20/24
Setting and addressing: Control panel with LED display
16-bit control: Rotating gobos, pan & tilt
Movement control options: Tracking and vector
Protocol: USITT DMX512/1990
Receiver: Opto-isolated RS-485
Firmware update: Serial upload via DMX link
Lamp
Type: 1200 W short-arc discharge
Fitted as standard: Philips MSR 1200 SA/DE Gold
Color temperature: 6000 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Hot restrike: Yes on electronic ballast models
Socket: Double-ended SFc 10-4 with key
Ballast: Electronic (on E models) or magnetic
Approved alternative lamp(s): Osram HTI 1200 D7/60 SharXS
Construction
Color(s): Black
Housing: UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
Gobos
Outside diameter: 37.5 mm +0/- 0.3 mm
Maximum image diameter: 30 mm
Maximum thickness: 7 mm (glass), 0.5 mm aluminum
Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating
Installation
Mounting points: 4 pairs of 1/4-turn locks, 45° orientation possible
Orientation: Any
Connections
AC power input: 3 m integral cable without power plug
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-120/208-240 V nominal, 50/60 Hz (electronic ballast)
AC power: 200-240 V nominal, 50/60 Hz (magnetic ballast) Power supply unit: Auto-ranging electronic switch-mode (electronic ballast models)
Main fuse: 15 AT (x 2, for use with 208-240 V power) Main fuse: 20 AT (x 2, for use with 100-120 V power)
Typical Power and Current
Electronic Ballast
100 V, 50 Hz: 1590 W, 19.8 A
100 V, 60 Hz: 1560 W, 19.3 A
120 V, 50 Hz: 1560 W, 16.8 A
120 V, 60 Hz: 1540 W, 16.3 A
208 V, 50 Hz: 1470 W, 10.5 A
208 V, 60 Hz: 1470 W, 10.3 A
230 V, 50 Hz: 1480 W, 9.6 A
230 V, 60 Hz: 1470 W, 9.4 A
250 V, 50 Hz: 1480 W, 8.6 A
250 V, 60 Hz: 1480 W, 8.5 A
Magnetic Ballast
208 V, 50 Hz: 1520 W, 9.3 A
208 V, 60 Hz: 1410 W, 7.5 A
230 V, 50 Hz: 1470 W, 7.6 A
230 V, 60 Hz: 1450 W, 7 A
250 V, 50 Hz: 1480 W, 7.4 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Thermal
Cooling: Filtered forced air (temperature-regulated)
Maximum ambient temperature (Ta max.): 40° C
Maximum surface temperature, steady state, Ta=40° C: 140° C Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 5290 / 5050 BTU/hr.
Approvals
EU EMC: EN 50 081-1, EN 50 082-1
EU safety: EN 60598-1, EN 60598-2-17
Canadian safety: CSA C22.2 No. 166
US safety: ANSI/UL 1573